Philips HeartStart XL+

Description

Philips HeartStart XL+ Specifications

Dimensions

• Height: 9” (23 cm)
• Width: 11.6” (29.6 cm)
• Depth: 10.9” (27.9 cm)
• Weight: 14.7 lbs (6.6 kg)

Defibrillator

• Waveform: Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance
• Shock Delivery: Via multifunction electrode pads or paddles
• Shock Series: Configurable Energy Escalation in a series
• Charge Time: 3 to 17 seconds
• Patient Impedance Range: 25 to 250 ohm

Display

• Type: Extended Life Lithium, disposable, non-rechargeable
• Operating Life: 5-years
• Shelf Life: 5-years
• Charge Time: 11 seconds to charge a fully discharged Survivalink AED to its maximum energy with a new battery

Energy Levels

• Size: 6.5” (16.5 cm) Diagonal viewing area
• Type: Color TFT LCD
• Resolution: 640 x 480 pixels (VGA) with 32 brightness levels per color
• Sweep Speed: 20 mm/s nominal for ECG and SpO2
• Wave Viewing Time: 5.2 seconds

Battery

• Type: Rechargeable, Lithium-ion
• Charge Time: > 3 hours
• Life: ~3 Years

Printer

• Continuous ECG Strip: The print button starts and stops the strip. The printer can be configured to be run real-time or with a 10-second delay. The strip prints the primary ECG lead and a second wave with event annotations and measurements
• Auto Printing: The printer can be configured to automatically print on Mark Events, Charge, Shock, and Alarm
• Speed: 25 mm/s: With an accuracy of ±5%
• Amplitude Accuracy: 5% for offset voltages of ± 300 mV at 5Hz
• Paper Size: 50mm wide x 30m long