Getinge Maquet Servo-S

Maquet

(0 customer reviews)

Siemens Getinge Maquet Servo-s Ventilator Features

The Getinge Maquet Servo-s ventilator features a wide range of ventilation modes that can be tailored to specific clinical situations. The Servo-s has a large intuitive user-interface that provides valuable decision-support information. This Maquet ventilator has been designed for both shelf mounting and in-hospital transport with a mobile cart. It supports invasive and non-invasive ventilation with leakage compensation for non-invasive ventilation modes for all patient types. If you’re looking for a similar model try the Servo-i ventilator.

Invasive and non-invasive ventilation with leakage compensation.
User friendly user-interface.
Rotary dial and direct access knobs for navigation.
Designed for shelf mounting or intrahospital transport with a mobile cart.
Quick inspiratory flow controller allows for reduced work of patient breathing.

Add to wishlist

Compare

Category: Ventilator Tag: Icu Maquet

Description

Siemens Getinge Maquet Servo-s Ventilator Specifications

Dimensions

Height: 20.5” (52 cm)
Width: 15” (38 cm)
Depth: 11.8” (30 cm)
Weight: 44 lbs (20 kg)

Parameter Settings

Inspiratory tidal volume (ml): 100–2000
Inspiratory minute volume (l/min): 0.5–60
Apnea, time to alarm (s): 15–45
PC/PS above PEEP (cmH2O): 0–(120 – PEEP)
PC/PS above PEEP in NIV (cmH2O): 0–(62 – PEEP)
PEEP (cmH2O): 0–50
PEEP in NIV (cmH2O): 2–20
CMV frequency (breaths/min): 4–100
SIMV frequency (breaths/min): 1–60
Breath cycle time, SIMV (s): 1–15
P_High (cmH20): (PEEP + 1)–50
T_High (s): 0.2–30
T_PEEP (s): 0.1–10
O2 concentration (%): 21–100
I:E ratio: 1:10–4:1
T_Insp (s): 0.1–5
T_Pause (% of breath cycle time): 0–30
Flow trigger sensitivity level: 0–10
Press. trigg sensitivity (cmH2O): -20–0
Insp. rise time (% of breath cycle time): 0–20
Insp. rise time (s): 0–0.4
End inspiration (% of peak flow): 1–70
End inspiration in NIV (% of peak flow): 10–70
Oxygen Breaths: 100% for 1 minute
Start Breath: Initiation of 1 breath (In SIMV mode initiation of 1 mandatory breath)
Pause Hold: Insp. or exp (0–30 seconds)

Screen

Type: TFT-LCD module
Size: 12.1” (31 cm) diagonal
Viewing area: 9.7” x 7.3” (24.6 x 18.5 cm)

Backup Parameter Settings

Inspiratory Tidal Volume (ml): 100–2000
PC Above PEEP (cmH2O): 5–(120 – PEEP)
PC above PEEP in NIV (cmH2 O): 5–(62 – PEEP)
CMV frequency (breaths/min): 4–100
I:E ratio: 1:10–4:1
T_Insp (s): 0.1–5

Power

Power Supply, Automatic Range Selection: 100–120 V AC ±10%, 50–60 Hz, or 220–240 V AC ±10%, 50–60 Hz
External 12 V DC: 12.0 V–15.0 V DC, 10 A
Battery Capacity: 2 rechargeable battery modules 12 V, 5 A, 3.5 Ah each
Battery Backup Time: At least 1 h with 2 fully charged batteries
Battery Recharge Time: Approximately 3h/battery
Max Power Consumption: At 100–120 V: 2 A, 190 VA, 140 W; At 220–240 V: 1 A, 190 VA, 140 W

Controlled Invasive Ventilation

PC (Pressure Control)
VC (Volume Control)
PRVC (Pressure Regulated Volume Control)
Can be configured with alternative flow patterns: VC with flow adaptation; VC without flow adaptation; VC with decelerating flow

Supported Invasive Ventilation

PS/CPAP (Pressure Support / Continuous Positive Airway Pressure)

Combined Invasive Ventilation

SIMV (PC) + PS (Synchronized Intermittent Mandatory Ventilation)
SIMV (VC) + PS
SIMV (PRVC) + PS
Bi-Vent/APRV (Airway Pressure Release Ventilation)

Non-Invasive Ventilation

Leakage Compensation Level: Inspiratory, up to 200 l/min; Expiratory, up to 65 l/ min
Leakage Overrange Detection: Automatic
Disconnect Detection: Automatic
Disconnect flow: Low; High; Disabled; Configurable 7.5 l/min; 40 l/min;
Deactivates disconnect detection
Connect Detection: Manual, or automatic via bias flow

Reviews (0)